MX2000-3 Three-Sided Sintered Alloy Wear Plate

The bimetallic slide plate with wear-resistant alloy sintered on three sides is a new type of self-lubricating plate. Compared with the general single-sided or double-sided sintered bimetallic slide plate, the sintered alloy layer surface of the product is three sides, which can provide more lubrication. Compared with the copper alloy slide plate, the material cost is significantly reduced due to the process of sintering copper alloy on the steel substrate. In addition, due to the use of a special powder metallurgy sintering process and the filling of solid lubricating materials in the copper alloy layer, the product can maintain good self-lubricating properties under high temperature conditions, the friction coefficient is significantly reduced, and the wear resistance is greatly improved. It can be used on tire molds, automobile molds and other equipment.

Get A Quote

PREV：No previous article NEXT：MX2000-2 Nickel-Graphite Dispersed Alloy Bearing

Product Introduction
Parameter
Material Description
Contact Us

Product Features

1 Can work for a long time under oil-free conditions.

2 More suitable for low-speed and heavy-load workingconditions, with good wear resistance and extremely low frict.

3 Suitable for situations where oil film is difficult to form, such as reciprocating, rotating and intermittent movements.

4 Resistant to corrosion and oxidation.

5 Maintenance-free and long service life.

Why Choose Oilless Bearings

Reduce Manufacturing costs

There is no need for oil supply device, oil injection hole or oil groove processing, which can greatly save manufacturing costs.

Reduce Operating Costs

It greatly reduces the usage of lubricating oil, reduces equipment maintenance, and avoids hidden dangers caused by insufficient oil supply, effectively reducing operating costs.

Shorten Design Time

The oil-free design simplifies the product structure and effectively saves design time. We are professional ODM Suppliers of MX2000-3 Three-Sided Sintered Alloy Wear Plate

Conducive To Environmental Protection

No waste oil recycling is required, which is also beneficial to environmental protection.

Application Fields

High Temperature

·Steel factory

·Smelting furnace

·Drying equipment

·Baking oven

·Heat controller

Water Proof

·Dam gate

·Water pump

·Fluid switch structure

·Offshore structures

·Dock and silt machine equipment

Chemical Industry

·Chemical factory

·Electroplating equipment

·Wastewater treatment equipment

·Dyeing machinery

·Oil and chemical refining equipment

Energy

·Wind power

·New energy

Ship

·Deck crane

·Anchor

·Hatch cover

·Rudder arm

·Lifting machinery and lifting ring equipment

Automobile Manufacturing

·Stamping mold

·Welding structure

·Painting and drying line

·Metal conveyor belt

·Machine tools

Heavy Industry

·Steel pipe factory machinery

·Tire and paper mills

·Power plant

·Connecting toggle of mold injection machinery

Construction, Mining, Loading

·Mixers, grinders, pulverizers

·Construction machinery

·Mining equipment

·Connecting rod bearings

Bridges and Lift Rails

·Bridge bearings

·Beams, bridges, suspension bridges

·Nuclear energy related reactors

·Steam generator

MX2000-3#1 Self-lubricating plate-10mm

Part No.	Holes	W(mm)	L(mm)	Part No.	Holes	W(mm)	L(mm)
MX2000-3#1-18-75	2	18	75	MX2000-3#1-75-300	3	75	300
MX2000-3#1-18-100	2	18	100	MX2000-3#1-100-100	4	100	100
MX2000-3#1-18-125	2	18	125	MX2000-3#1-100-125	4	100	125
MX2000-3#1-18-150	2	18	150	MX2000-3#1-100-150	4	100	150
MX2000-3#1-28-75	2	28	75	MX2000-3#1-100-200	4	100	200
MX2000-3#1-28-100	2	28	100	MX2000-3#1-100-250	4	100	250
MX2000-3#1-28-125	2	28	125	MX2000-3#1-100-300	4	100	300
MX2000-3#1-28-150	2	28	150	MX2000-3#1-125-125	4	125	125
MX2000-3#1-38-75	2	38	75	MX2000-3#1-125-150	4	125	150
MX2000-3#1-38-100	2	38	100	MX2000-3#1-125-200	4	125	200
MX2000-3#1-38-125	2	38	125	MX2000-3#1-125-250	4	125	250
MX2000-3#1-38-150	2	38	150	MX2000-3#1-125-300	4	125	300
MX2000-3#1-48-75	2	48	75	MX2000-3#1-150-150	4	150	150
MX2000-3#1-48-100	2	48	100	MX2000-3#1-150-200	4	150	200
MX2000-3#1-48-125	2	48	125	MX2000-3#1-150-250	4	150	250
MX2000-3#1-48-150	2	48	150	MX2000-3#1-100-100	2	100	100
MX2000-3#1-48-200	2	48	200	MX2000-3#1-100-125	2	100	125
MX2000-3#1-48-250	2	48	250	MX2000-3#1-100-150	2	100	150
MX2000-3#1-58-75	2	58	75	MX2000-3#1-100-200	2	100	200
MX2000-3#1-58-100	2	58	100	MX2000-3#1-100-250	2	100	250
MX2000-3#1-58-150	2	58	150	MX2000-3#1-125-125	2	125	125
MX2000-3#1-75-75	2	75	75	MX2000-3#1-125-150	2	125	150
MX2000-3#1-75-100	2	75	100	MX2000-3#1-125-200	2	125	200
MX2000-3#1-75-125	2	75	125	MX2000-3#1-125-250	2	125	250
MX2000-3#1-75-150	2	75	150	MX2000-3#1-150-150	2	150	150
MX2000-3#1-75-200	2	75	200	MX2000-3#1-150-200	2	150	200
MX2000-3#1-75-250	3	75	250	MX2000-3#1-150-250	2	150	250

MX2000-3#2 Self-lubricating plate-20mm

Part No.	Holes	W(mm)	L(mm)	Part No.	Holes	W(mm)	L(mm)
MX2000-3#2-28-75	2	28	75	MX2000-3#2-75-150	2	75	150
MX2000-3#2-28-100	2	28	100	MX2000-3#2-75-200	2	75	200
MX2000-3#2-28-150	2	28	150	MX2000-3#2-75-250	2	75	250
MX2000-3#2-38-75	2	38	75	MX2000-3#2-100-100	4	100	100
MX2000-3#2-38-100	2	38	100	MX2000-3#2-100-125	4	100	125
MX2000-3#2-38-150	2	38	150	MX2000-3#2-100-150	4	100	150
MX2000-3#2-48-75	2	48	75	MX2000-3#2-100-200	4	100	200
MX2000-3#2-48-100	2	48	100	MX2000-3#2-100-250	4	100	250
MX2000-3#2-48-125	2	48	125	MX2000-3#2-100-300	4	100	300
MX2000-3#2-48-150	2	48	150	MX2000-3#2-125-125	4	125	125
MX2000-3#2-48-200	2	48	200	MX2000-3#2-125-150	4	125	150
MX2000-3#2-58-75	2	58	75	MX2000-3#2-125-200	4	125	200
MX2000-3#2-58-100	2	58	100	MX2000-3#2-125-250	4	125	250
MX2000-3#2-58-150	2	58	150	MX2000-3#2-125-300	4	125	300
MX2000-3#2-75-75	2	75	75	MX2000-3#2-150-150	4	150	150
MX2000-3#2-75-100	2	75	100	MX2000-3#2-150-200	4	150	200
MX2000-3#2-75-125	2	75	125	MX2000-3#2-150-250	4	150	250

Copper alloy material

CuSn+Gr.

Maximum operating temperature

200℃

Maximum bearing pressure

73.5N/mm²

Friction coefficient μ

0.04~0.20
SUBMIT

About US

Zhejiang Mingxu Machinery Manufacturing Co., Ltd. Zhejiang Mingxu Machinery Manufacturing Co., Ltd., formerly known as Jiashan Mingxu Precision Machinery Factory, was founded in 2011. The company is located in the hinterland of the Yangtze River Delta Integrated Development Demonstration Zone, with location and convenient transportation. With more than ten years of manufacturing and R&D experience, the company has been deeply involved in the development and production of solid lubricating bearings, skateboards, slideways, and sliders. ODM Suppliers and Company of MX2000-3 Three-Sided Sintered Alloy Wear Plate in China. The product manufacturing adopts modern automation equipment, strictly implements the ISO2000 quality management system standard, and the main processes are processed by high-precision CNC machines. The company's main products cover a series of products such as JDB solid inlaid self-lubricating bearings, steel-copper sintered bearings, SF-1 self-lubricating bearings, SF-2 boundary self-lubricating bearings, and FB090 copper bearings. Widely used in automobile industry, construction machinery, metallurgical equipment, mining machinery, injection molding, mold, textile, printing and many other machinery manufacturing fields; Till now, the company's products have spread all over China and exported to many foreign countries, and are deeply recognized and loved by domestic and foreign customers.

Mingxu Machinery adheres to the service tenet of "quality-oriented high-quality service", and strive to provide customers with professional products and services. Supply Wholesale MX2000-3 Three-Sided Sintered Alloy Wear Plate. The company will continue to introduce talents, improve the management mechanism, integrity, development, innovation, and strive to build a world-class brand.